Alberta Outdoorsmen Forum

Alberta Outdoorsmen Forum (http://www.outdoorsmenforum.ca/index.php)
-   Guns & Ammo Discussion (http://www.outdoorsmenforum.ca/forumdisplay.php?f=6)
-   -   What did you do in your reloading room today? (http://www.outdoorsmenforum.ca/showthread.php?t=390361)

Pathfinder76 11-10-2020 10:41 AM

What did you do in your reloading room today?
 
So far nothing. But, I saw this type of thread on another forum. It was full of pictures, gear reviews, process etc. It looked like a great idea. Maybe it will work here.

So what did you do in your reloading room today? :-)

sako1 11-10-2020 12:16 PM

I would love to show you! But im a clueless twit when it comes to posting pics on here....lol

Dick284 11-10-2020 04:39 PM

I was down to the reloading room about 6:15 this morning.
I took 2 rifles out of there storage spaces, and went hunting with them(not both at the same time)

Pathfinder76 11-10-2020 05:25 PM

Getting ready to butcher tonight.

https://i.imgur.com/kfHZbmP.jpg

waldedw 11-10-2020 06:43 PM

Not a darn thing, it's hunting season the loading room hibernates now till December :sHa_shakeshout:

Did all my loading during lock down :)

Pathfinder76 11-10-2020 07:25 PM

I also melted some brass for science. :-)

https://i.imgur.com/NFyMTT6.jpg

leo 11-10-2020 07:57 PM

Quote:

Originally Posted by chuck (Post 4265589)
I also melted some brass for science. :-)

https://i.imgur.com/NFyMTT6.jpg

Looks like Bob Hagel and Warren Page’s favourite 7

schreyer 11-10-2020 07:59 PM

I trimmed, chamfered and deburred about a hundred pieces of 308 win!

kujoseto 11-10-2020 09:41 PM

Quote:

Originally Posted by chuck (Post 4265589)
I also melted some brass for science. :-)

What is going on in this pic?

As for my reloading room, all I did was tidy up some hand tools the kid was digging into to build something over the weekend. He is 4 and always up to something. That is why all the reloading stuff gets locked up!

Pathfinder76 11-10-2020 09:44 PM

Quote:

Originally Posted by leo (Post 4265616)
Looks like Bob Hagel and Warren Page’s favourite 7

It is!

Pathfinder76 11-10-2020 09:45 PM

Quote:

Originally Posted by kujoseto (Post 4265696)
What is going on in this pic?

As for my reloading room, all I did was tidy up some hand tools the kid was digging into to build something over the weekend. He is 4 and always up to something. That is why all the reloading stuff gets locked up!

I’m just setting the annealer.

6.5 shooter 11-10-2020 09:48 PM

cleaned up, neck turned some 6mm International brass, Repaired a scope.

Chargerguy 11-10-2020 10:29 PM

Quote:

Originally Posted by chuck (Post 4265589)
I also melted some brass for science. :-)

https://i.imgur.com/NFyMTT6.jpg

Looks like the Aztec mode.

Pathfinder76 11-10-2020 10:56 PM

Quote:

Originally Posted by Chargerguy (Post 4265735)
Looks like the Aztec mode.

I wish it was Aztec gold.

DLab 11-11-2020 07:32 AM

Quote:

Originally Posted by chuck (Post 4265745)
I wish it was Aztec gold.

I think he may have been referring to the AMP Annealer with Aztec mode software Chuck.
https://www.ampannealing.com/aztec/

Pathfinder76 11-11-2020 08:45 AM

Quote:

Originally Posted by DLab (Post 4265794)
I think he may have been referring to the AMP Annealer with Aztec mode software Chuck.
https://www.ampannealing.com/aztec/

Yes, that’s what I was doing. :-) I’ve got a bunch of fireformed cases that need annealing.

Northwinds 11-11-2020 09:47 AM

todays job is necking down 200 PPC cases to make 20 ppc brass.

Grizzly Adams 11-11-2020 10:34 AM

Looked for my second box of .270 Short Mag. :lol:

Grizz

Pathfinder76 11-11-2020 11:29 AM

100 new 7MM Mashburn Gunworks cases annealed. Now I need my new barrel installed.

https://i.imgur.com/18uwWkT.jpg

Pathfinder76 11-14-2020 04:19 PM

Setting up trim to length dummies.

https://i.imgur.com/JheXAqQ.jpg

Redneck 7 11-14-2020 06:35 PM

Last time I was in my reloading room I pressed 30 .243 rounds for my coyote rifle and got organized for the hunting trip I’m on. I’ll back in the bunker December 2nd to start prepping brass for other rifles.

duceman 11-14-2020 06:38 PM

loaded up some test loads for a bsa martini in 218 bee.
loaded up some test loads for a 222 rem mag with 69 gr tmk’s.
tightened up some scope bases on fella’s 300 win 🙄; then zeroed it.
mounted one of my old school tasco target scopes on my 222 rem mag.
checked zero on my 6x47 rem then lent to a buddy for his son to take his first deer.
a little organizing.

DiabeticKripple 11-14-2020 06:39 PM

Sharpened some knives on my work sharp Ken Onion edition for butchering deer tomorrow.

Last night I installed some new inserts in some arrows.

Last reloading session was 25 rounds of 7mm Rem Mag with 120gr TTSX for hunting the next few years.

Salavee 11-14-2020 07:04 PM

Finished my final load development for my 6.5x 55 SE . Used SKAN loads.

Seated the 156 Berger EOL to max mag length (3.220) and tested velocities.

Settled on 2775 MV. Looking good. Groups tomorrow.

cowmanbob 11-14-2020 07:06 PM

Got the place prepped for drywall.

hawk-i 11-14-2020 07:08 PM

Quote:

Originally Posted by chuck (Post 4265589)
I also melted some brass for science. :-)

https://i.imgur.com/NFyMTT6.jpg

I've got one of those as well...fricken awesome units :sHa_shakeshout:

kujoseto 11-15-2020 01:16 PM

7mm-08 120 NBT 44.4gr RL15 2.780”

https://uploads.tapatalk-cdn.com/202...4462381f0e.jpg

tchardy1972 11-15-2020 05:20 PM

Quote:

Originally Posted by chuck (Post 4268098)
Setting up trim to length dummies.

https://i.imgur.com/JheXAqQ.jpg

Nice trimmer!

tchardy1972 11-15-2020 05:22 PM

Neck turned some 7mm rem mag brass until my drill died.

6MT 11-15-2020 05:38 PM

Only loaded 57 rounds of 6.5CM today.

https://i.postimg.cc/j5F3dtG0/E91908...-FBB10-AED.jpg

Just got back from a 10 day vacation and had to move a bunch of snow on my land. Took me almost 5 hours.


All times are GMT -6. The time now is 04:16 AM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.