Received my BCL102
Well I was fortunate enough to get my hands on a BCL102. I ordered it in December and received it Thursday evening. I got 1 of the 21 Burnt Bronze models.
If you don't know a BCL102 is a AR-102 in 308 that is built in Canada and isn't restricted. I added a vortex strike eagle 1-6x24, a vortex cantilever mount, Tyrant Designs for grip, Ozark Armament 45 degree chanted BUIS. BCL blast shield and an Ergo Deluxe grip, that fits poorly. I got a MFT Battlelink minimalist stock but I got the wrong size, so I'll update that soon. I want to put a new trigger in it but I'm going to wait until I have a couple 100 rounds through it. http://i.imgur.com/AaxIPqA.jpg http://i.imgur.com/9uOgvn7.jpg http://i.imgur.com/K8T5eIf.jpg |
Nice looking rifle / set up, I like the color you picked.
|
Looks good. Let us know how it works and how it shoots.
|
My buddy has been on the backorder list for awhile now and should have it end of May. I’d have ordered one too if I were going in that direction. Let us know hiw it shoots.
|
Good looking rig. Lots of fun in that package!!
|
I'm expecting mine to arrive any time now. Opted for the black version. I can't wait to set it up and give it a whirl.
|
Is everything as it should be or did BCL add their own unique twist?
|
Well I haven't owned an AR102 before so I can't tell if BCL added any "twists"
That said I am very impressed with the build quality, the machining is at least as good as MDT's machining. Any of the complaints I've heard of aren't visible on mine. Of my 12 mags, the factory and CPD mags drop out no problem, Pmag is a little sticky. Mind you I'll know a little better after a few 100 rounds |
Can you take an up close picture of the flutes on your barrel?
Mine looks like a 12 year old did the machining my hand. |
Quote:
|
Awesome guns! Although I did not spend much time developing a load in the factory configuration... I tried 3-4 different loads in the factory .308 and accuracy was 2moa at best, getting half MOA in the 6.5 but it cost a few dollars and a fair bit of effort. A lot more variables to get the accuracy with a gas gun...
https://i.imgur.com/36ol5XP.jpg https://i.imgur.com/HP16IL2.jpg https://i.imgur.com/Wn4uOkH.jpg |
Quote:
I can tell you, if mine looks like what you are describing, I'm packing it up and putting it up for sale as an unfired gun. Heck I can probably turn a profit since these are so hard to get .... lol .... but I have no interest in correcting a weapon with defects. A defect this obvious is indicative of other things manufactured by BCL and I'm not interested in experiments. I'm hoping this isn't the case anyways .... fingers crossed. |
I noticed one is already for sale in the classifieds:
Link Doesn't list a price but I am curious as to why he's selling it. |
The machining on mine was excellent. Some toolmarks visible on the bolt carrier, that's it. Considering a match ready restricted AR-10/DPMS 308 is in the $3500+ range I don't think you can beat it for price. Just don't expect half moa accuracy out of a stock BCL-102, it's not happening... At least they made it so you can easily upgrade parts, they could have made everything proprietary...
|
1 Attachment(s)
Quote:
Attachment 145124 Hopefully someone gets .5" with these rigs....nice looking though. |
Quote:
|
been working with one for a while now best group was 2.75" but the average would hover around 4" found a few issues but am thinking the biggest one is the barrel is just crap. the flutes arent even close to being timed correctly. Gun has around 300 rounds out of it and the gas rings are destroyed. It is a pretty expensive receiver set at this point lol
|
Toss that bolt and get a JP high pressure with .062 firing pin! The stock barrel is junk they need a better barrel. I had full intentions of rebarrelling to 6.5 before I even placed my order last August
|
|
Those flutes look like they were done with a Dremel tool
|
I too have a bronze bcl102 coming, was shipped yesterday. I hope my barrel isn't as rough as the one above. Gonna have to swap out a lot of BCL parts for proven AR10 parts. Probably gonna swap the barrel too.
|
Thats about how the one ive been playing withs flutes look
|
I just received my BCL a few weeks back. Reading all the negative press about these rifles has me nervous now. First thing I noticed about my rifle is that its impossible to mount a sling to it. It has the QD mount in the stock but nothing in the rear... 1800 dollar gun and I have to spend more money to attach a sling... weak.
How is yours shooting now? do you still have it? |
I find that if you have the scope canted just a little bit it shoots better
|
Quote:
|
Quote:
|
Quote:
|
Quote:
|
Quote:
You can convert a BCL 102 from 308 to 6.5 fairly easily. Personally, I would rather have a Canadian made firearm any day, but I do understand the amount of bad press BCL has received. I have several 100s of rounds through mine and I am still very happy with it. |
New Canadian Made 102 Uppers
The guys at Black Leaf Industries in Edmonton are rolling out their own BL102 uppers soon. Just saw them on the weekend at the range and they are shooting less than an inch at 100 meters with theirs.
From what they said roughly the same price for better machined material and they come anodized as well. Almost makes me want to buy one now! |
All times are GMT -6. The time now is 11:27 PM. |
Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.