Lyman 450 lubrisizer
My buddy busted the handle on his Lyman 450. Is there such a thing as a parts list for them, or does anyone have an old parts one laying around they would let go reasonable? Couldnt hit the right notes on the internet to find a parts list, and Ebay comes up empty.
|
450 lub sizer
try lyman web site
|
When mine broke I just made one out of steel and a little welding...but from a Lyman book..
new model...handle # 2745812 / handle link that the handle screws into 2745815 / bullet knockout link 2990604 ( this is the long vertical bracket that lifts on the ram to lift the bullet out of the sizer die. Old style..handle ( plastic) 8999027 , operating handle 2990602 ( shaped like a 90degree handle that the plastic handle fits on. bullet knock out link 2990604 A pic would greatly help out!! I do have a parts breakdown picture here but its might be hard to take a pic of or scan. |
Lyman has a parts list on line
|
Lyman website
I found their website extremely difficult to maneuver around. Just not plugging in the right search words I guess.
His is the older model with two straps from each side coming together and covered by a plastic sheath, not the model with the solid bar handle |
http://www.lymanproducts.com/lyman/b...BC_LS_4500.pdf
Scroll to the bottom..compare the press to the parts numbers I listed. With the parts numbers I listed all you should have to do is write them down,go to the Lyman site and type them into a search box on there site |
different model!
Thanks for the link Icehunter, but the model you found is the newer one. The older style that my freind broke, has the two sides of the strap material coming right up and making two sides of the handle under the plastic handle sheath. Does not have the solid handle like the newer model. The handle broke right through both bolt holes where it attaches to the machine as a pivot point.
|
All times are GMT -6. The time now is 01:13 AM. |
Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.